DTF Pressing Instruction

To get the best results from your Inkjet Xpress DTF transfers, follow these instructions carefully. Our transfers are designed to deliver vibrant color, soft feel, and long-lasting durability — if pressed properly! 💪

🔧 Pressing Equipment Needed:

  • Heat Press Machine (not a Cricut or iron)

  • Parchment Paper or Teflon Sheet

  • Lint Roller (optional but helpful)

  • Heat-Resistant Tape (optional for positioning)

👣 Step-by-Step Pressing Instructions:

1️⃣ Pre-Press the Garment

  • Set your heat press to 300°F – 325°F (149°C – 163°C)

  • Press the blank garment for 5 to 7 seconds

  • This removes wrinkles and moisture that can affect adhesion

  • Use a lint roller before pressing to eliminate debris and fibers 🧼

2️⃣ Position the Transfer

  • Place your DTF transfer face up (design side up) on the garment

  • The adhesive side (matte side) should touch the fabric

  • Align it exactly where you want it pressed — use heat-resistant tape if needed for clean placement 🎯

3️⃣ Press Settings

  • 🔥 Temperature: 300°F – 325°F

  • ⏱️ Time: 10 – 15 seconds

  • 💪 Pressure: Medium to Firm (40–60 psi)

Not enough pressure = poor adhesion or flaking
Too much heat = color burn or glue spread

4️⃣ Peel Method

  • ❄️ Cold Peel (Recommended):
    Let the shirt cool completely (20–30 seconds), then peel the film slowly and smoothly from one corner. Best for clean edges and long-lasting wear.

  • 🔥 Hot Peel (Optional):
    Peel immediately after pressing while hot for faster workflow. May result in slightly glossier finish. Use only with high-quality garments.

5️⃣ Final Press (VERY IMPORTANT!)

  • After peeling, place parchment paper or a Teflon sheet over the print

  • Re-press for 5 to 10 seconds using the same temperature

  • This melts the adhesive fully into the fibers and increases wash durability 💎

Skipping this step can result in cracking or premature peeling!

🧼 Washing & Care Instructions

Taking care of your DTF-printed garments will ensure they last 50+ washes! Follow these simple rules:

✔ Turn inside out before washing
✔ Wash cold on gentle cycle
✔ Avoid bleach or fabric softeners
✔ Tumble dry low or hang dry for best results
✔ Do NOT iron directly over the print – use a pressing cloth if needed
✔ Avoid harsh detergents or excessive soaking

🛑 Common Mistakes to Avoid

🚫 Using an iron or handheld press
🚫 Applying on damp or wrinkled fabric
🚫 Pressing with incorrect temperature or pressure
🚫 Forgetting the final repress
🚫 Peeling too early on cold peel transfers

📩 Still need help?

Reach out anytime:
📧 inkjetxpress@outlook.com
We’re happy to review your setup or troubleshoot any issues with your press!